How do I set up my SNOO? (Video Tutorial)

Most parents find set up to be quite easy!

  1. Remove all contents from the box.
  2. Remove SNOO from the protective cloth bag and place it—upside down—on top of the bag or another clean surface.
  3. Insert each leg into base (match red and blue arrows on leg brackets to their corresponding colored arrows on the base).


  1. Push each leg into base until you hear a “click.”
  2. Hand-tighten all bolts.


  1. Insert power adapter into socket in the middle of the bottom of base. (There is a red circle around the socket.)
  2. Now, place SNOO on its 4 feet.
  3. Place the rubber power cable holder on the leg that is closest to your wall power outlet.


  1. Insert the power cable over the entire length of the power cable holder.
  2. Plug the power cord into your wall power outlet.
  3. The power button at the front of SNOO will flash on and off for a short while before glowing a constant white light.


  1. SNOO is now ready to help you soothe and protect your baby!



  • Always keep SNOO on a flat, even surface.
  • Never place anything under the mattress to elevate the baby’s head.

 Check out the following video tutorial for more information: 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request



Article is closed for comments.